The Work Boots-More Than Just A Working Shoe

Already knew? From 15,000 to 13,000 BC For instance, boot-like protective clothing for legs and feet was a compulsory part of the best solution for hazardous or hard work, if not the only one. At least on the wall paintings in the Altamira Cave, Spain, one can still look quite authentically the pioneers of protective boots on the legs of hunters. Also, quite soon, they drew above all the soldiers from more and more to the recreation entrance, for hikers, climbers and even hunters from the year.

What one hardly suspects: These footwear, which nowadays serve as legendary trendsetters for cool, casual appearances also outside the working world, were equally common. The presentation of the Amazons is still today for all sorts of Fashion trends. Also in the design of these forerunners of the boots was not differentiated or hardly by sex-the differences in past times consisted only in the shape of the shaft and possibly the heel height to compensate the body height.
Beginning in the 19th century, it was well-known that the mass production in limitless designs, for all tastes and applications. In the USA, for the time being created for the soldiers, they later used the uniqueness of the cowboys to create a symbiosis between purpose and cool style, which would remain unattainable with a bare shoe.

Purpose-Medium-Relation: Safety As A Trendsetter In Working Boots

The bikers of all countries gratefully acknowledged this requirement, and besides stint, the motorcycle boot is an indispensable tool for their personal safety. In addition, there is hardly an industry without them that demands a hard grab: the work boots of today are more than a mere symbol – their commitment is partly compulsory, partly expression of masculinity in a personal style and in today’s offerings for almost every activity the ideal With suitable footwear, from amateur gardeners to astronauts.

Working Boots Today: What Should Everyone Know?

While some of the legal norms on special products do not permit any alternative, no other barrier is granted to others. However, the predefined criteria for a wide variety of work assignments are by no means negligible characteristics, but effects which are of benefit to everyone: a look at them is always worthwhile. In our latitudes we differentiate between mere protective and professional shoes.Typical hazards are included in the requirements.
Essentially, for example, the firm seat on the foot-a loose, movable footwear not only affects the well-being, but also the driving of a motor vehicle or bicycle with certainty. Many easy-to-avoid accidents have wrong footwear already to represent. Perfect closeness to the at least the front part, if necessary strengthened (“protective cap”) protects against external influences. Even a door, which could bear a few centimeters more downwards, can make a strong impression on the front foot part if you do not maintain a sufficient safety distance. Above all, one is protected from falling objects with an adequate front part.
Also the firm hold of the heel can prove to be significant – just think of a quick step on a staircase where the shoe is too far from the foot. The heels of work boots are always as large as possible – and this has its good reason. As long as you are not trying in table-dance, the tread area should be wide and moderate in height, the soles as well as the heels have to be made of non-slip materials. Not only in the working world is a well-shaped and fitting footbed the guarantee of tolerability for many hours of use.

Knee Protection – The Big Plus

So far so good. The main difference to the bare work shoe is the boot as a dressing and this is not only a better grip or cooler look: Knee protection is a special area of ​​the safety inspectors when an activity demands this but also important aspect for bikers or handling dangerous substances.

Occupational And Private Employment Of Work Boots

In addition to work in the wet area or on the construction site, especially the range of means of combatant testing or clearance, the abandonment of old quarries and demolition and disposal are the regulated areas of operation. But also the erection and dismantling of tents or other “flying buildings” is a source of danger for, among other things, foot and leg. And these activities are also often a privately-held subject, without being protected in advance.
Steelworks, forging and industry are, of course, those areas where compulsory use is prescribed. But here, too, the hobbyist can look a lot. All handling with chemicals or other hazardous liquids requires clear protection. Last but not least, large-scale kitchens are covered, where the drawing of weighing and filling operations is not to be underestimated. Here and in hazardous areas, the permeability of moisture to the form of the material is to be prevented. Insulation of electricity is also a major issue due to special work boots. Cold and thermal insulation can be actively operated and the entire materials are of the utmost importance.
It is therefore worth the purchase even if only occasional situations are available, such as in leisure time. One can be guided by the professionally prescribed criteria. Some tips to choose from when a general “as safe” work boots for various or private purposes is voluntarily purchased are therefore:

The boot should have as high a shank as possible, unless one resorts to special knee protection, which is mainly offered in the specialist trade for athletes. In the latter case, high ankle boots are sufficient , which, however, should at least go beyond the ankle. But be careful: the shinbone remains unprotected.

The sole should consist of rubber-like materials and should be equipped with protective goggles.

A protective cap made of steel can never hurt. Meanwhile there are already models, where plastic caps meet their purpose.

Models with midsoles for safety before “passage” should be requested in concrete terms. These are available even in brand-safe versions.

Water and/or liquid impermeability is not generally present in leather, so in agriculture there are mostly high-quality rubber boots, copolymer approximately.

Some models should be impermeable, but how long you can really rely on it is open. Ideal for various purposes, however, PU used in building safety, guaranteed to be one hundred percent waterproof and up to minus 20 Gard Celisus suitable for cold insulation.

Often equipped with steel caps and midsoles, one should be more likely to be convinced by these than one of the many models, which are ultimately only offered in the optics, but less so because of convincing arguments as “safety shoe”. There are all sorts of chic boots, which are certainly of a robust nature but do not really provide these concrete qualities.
However, anyone who observes these criteria and is able to estimate the probable needs of the footwear at least is the best way to ensure their own safety. More interesting and matching shoes for the modern man can be found on the following page: Men’s shoes-an overview.

The following note from a reader, I would not deny you:

Work boots with steel caps are to be used with caution: if the load is high, the cap can be permanently damaged and injuries to the forefoot; Special plastic is to a certain extent still flexible and therefore preferable to the conventional metal caps! As an everyday shoe, they are not suitable for pediatric use, as the hard cap toes and toenails can be permanently damaged.